91人人在线_一区视频_髙清无码性爱AV_国产乱了乱了精品视频

Precise locking system, outstanding efficiency, efficient servo drive, all meet all requirements. Focus on customer products, provide a complete set of technical solutions for customers, and create better investment returns and customer experience for global customers.

TWO COMPONENT INJECTION MOLDING MACHINE-ROTARY TABLE

It is suitable for many different applications, and has many technical functions, which will bring you more efficient production.

Wide range of applications

• High precistion mode change devices and two way 180 degree rotating back and forth, which may put two molds produce two component products.

Precision and stability

• Rotation platen with High efficiency gear transmission. High precision Servo Motor-drven. Motor-driven. Fast and smooth, the stop posistion is accurate.

Reliable and durable

• Self-lubricating wear-resistant surface. During operation, the rotation plate does not come in contact with the platen, thus reducing the possibility of damage caused ty friction.

Diversity choice

• Machine comes equipped sith two sets of hydraulic core pulling device on the rotatio platen. Simultaneous water transport device and choose hydraulic, air, and electrical circuit.

Humanized design

• The special design, Rotation platen supporting structure effectively prevents the drooping forward of the Rotation platen afer mold installed.

Safe and worry free

• With accurate mold positioning holes on platen can ensure precise location for mold installed.

TWO-COLOR INJECTION MOLDING MACHINE-ROTARY AXIS




• A rotary axis is located at the center of moveable platen, which could drive mould move around to produce inpidual two-component products.




• There are two independent barrel sets at injection unit; each of them could do unit injection action simultaneously.




• According to the request of products, the machine with flexibility could do ejection then tum the rotary table or turn rotary table firtst then do the ejection actian as well.




• This series machine is suitable for producting keyboard, handle bar. and hanger.....and etc.

INJECTION UNIT



• It is suitable for many different applications, and has many technical functions, which will bring you more efficient production.

 



High value

• Two isolated barrel sets inject at the same time, thereby reducing cycle time. The shorter cycle time increase productivity of the machine and hence helps to yield bigger profits.

 



High flexibility

• Two sets of indep endent proportion pressure / speed hydraulic circuit control two sets of injection sysetm and ejector system, according to the characteristic of flexible settings to optimize the injection process, to ensure that the production of plastic products of high quality, low-cycle and thus has a stronger market competitiveness.

 



High efficiency

• The single-cylinder injection unit with high torque and excellent performandce of hydraulic motor can drive screw directly, reduce iol leak, injection efficiency, high stability.

 

CONTROL SYSETM:

• The controller is adopting 400M high speed CPU, which can equip with semi-closure or fully closed system. Plus personality graphic operation interface, curve online testing function and central network connection management. Ample SPC quality management interface, it is absolutely the best tool to make profit.




• Equipped with six stages injection, three stages holding pressure, twostages suck abck and the holding pressure posittion switching controls etc, can flexibly adust according to different products. Precise injectionend and holding pressure position switching practice high precision andhigh stability injection function adopt lindal electrical ruler, precisionreaches 0.01mm, which can accurately control injection strok. it canrecord and display simultaneously samping temperature curve during continuous production process, injection and holding pressure switchingpoint and holding pressure finishing point. Having the function of historical curve allocation, its precision can reach 0.1mm and sytem stability is visiblesix PID stages barrel temperature control is precision can reach. It also has temperature abnormal & electrical wire disconnection alarmeunction, which is able to control the barrel temp-erature accurately. Screwlow temperature staring protection (cold start) can be prevent screw from damage accidentally, adjustable pre-heat temperature keeping and barrel auto heating function, which can arbitrarily set cleaning.

MOLD CLAMPING UNIT



• The locking device which is added on both sides of the Rotary Table can prevent effctively the incline of the Rotary Table




• Unique and accurate positioning device of the Rotary table cna ensure the stability of mold clamping and prevent mold damage.




• The unique reinforced design of Tie Bar and Toggle can effctively absorb the shear stress that generated by mold Clamping to extend the service ilfe of the machine.




• Ejector with multi-function on vibration ejection, ejection locate, multiple ejection. Pressure and speed of ejection canset by compuer.




• Low pressure result is perfect by equipped with high precision of the low pressure mold closing protection. That can be ste directly by monitor.




• Toggle is used by auto lubrication system, lubriction setting can be operated and monitored on the panel directly. And it owns itself lubrication failure alarm.

TWO COMPONENT INJECTION MOLDING MACHINE-ROTARY TABLE



• Adopts MIRLE microcomputer controller, optional closed loop hydraulic control system, showing extremely stable and accurate performance.




• The unique design of our company is that the rotary platen does not touch the mold platen when it rotates to reduce the failure caused by abrasion, and accurate posistioning confirmation is made before mold opening to protect the safey of the mold.




• The new generation of toggle clamping structure adopted in this machine, combined wutg bix-type mavable platenl and high-rigidity sand platen structure, has a simple and firm design, and throught finite element analysis of deformation and stress distribution, it has really reached the characteristics of high strength and wear-resisting, which can ensure the forming quality and the life of tie bar.




• The machine is equipped with a 32-tit elment high-speed CPU and a system reaction rate as high as 1.20ms, which can effctively improve the sensitivity and stability of the machine.




• The two respctive of injcection units adopt the new single-cylinder injection structure, which operates independently of injection and feeding, and can perform multiple compound injection actions




• Configure servo motor energy saving system to save energy effctively.

TWO PLATEN DOUBLE COLOR INJE CTION MACHINE

• Save space: two platen structure type compare traditional two coior machine, the length shorten 250%-30%




• Durable: FEAcubicle type temp template structure desing. Compare with common template strength upgrade more 150%, tem plate less deform, screw strength bigger 20% than traditional machine, long lifetime.




• Prexibie: according customer repuirement addition ejector strokeand ejector force.




• Fit customer to add opening stroke




• Flexble choose injection structure to coordinate customer requirement.

PRODUCTS SPECIFICATION

TECHNICAL PARAMETERS

Project		Unit	YC-130			YC-180
Injection Unit	Screw diameter	mm	Φ24	Φ26	Φ30	Φ26	Φ30	Φ34
	Shot volume	cm3	55	65	86	77	102	132
	Shot weight	gram	51	60	80	71	95	122
		ozs	1.8	2.1	2.8	2.5	3.3	1.3
	Injection pressure	kg/cm2	2406	2050	1540	2547	1913	1490
	Injection Speed	mm/s		129			121
	Injection Rate	cm3/sec	58	68	91	64	85	110
	Screw Speed (max)	rpm	280			250
Clamping Unit	Clamping force	metric tons	130			180
	Clamping stroke	mm	310			400
	Mould Thickness Range	mm	120-400			160-430
	Rotary Table Diameter	mm	720			830
	Distance Between Barrel Centers	mm	350			420
	Distance between tie bar	mm	600*400			710*440
	Ejector stroke	mm	70			100
Electrical Equipment	Pump Motor power	kw	7.5+7.5			9.4+9.4
	Temperature controller	(range)set	2-(0-400℃)*5			2-(0-400℃)*5
	Heater power	kw	7.2			8.8
Other	Machine dimensions	mm	5000*1100*1800			5584*1600*1840
	Machine weight	metric tons	5			7
	System pressure	kg/cm2	140			140
Platen dimensions
Platen dimensions
Platen dimensions

TECHNICAL PARAMETERS

Project		Unit	YC-230			YC-300
Injection Unit	Screw diameter	mm	Φ30	Φ34	Φ40	Φ34	Φ40	Φ45
	Shot volume	cm3	113	145	201	159	220	278
	Shot weight	gram	104	134	186	147	203	257
		ozs	3.7	4.7	6.5	5.2	7.2	9.1
	Injection pressure	kg/cm2	2489	1938	1400	3052	2205	1742
	Injection Speed	mm/s		106			82
	Injection rate	cm3/sec	75	96	133	74	103	130
	Screw Speed (max)	rpm	250			250
Clamping Unit	Clamping force	metric tons	230			300
	Clamping stroke	mm	450			500
	Mold thickness	mm	180-470			195-585
	Rotary Table Diameter	mm	960			1070
	Distance Between Barrel Centers	mm	450			500
	Distance between tie bar	mm	830*510			910*570
	Ejector stroke	mm	110			110
Electrical Equipment	Pump Motor power	kw	9.4+9.4			14.1+14.1
	Temperature controller	(range)set	2-(0-400℃)*5			2-(0-400℃)*5
	Heater power	kw	8.8			13
Other	Machine dimensions	mm	6800*1800*2100			7000*1900*2200
	Machine weight	metric tons	13			15
	System pressure	kg/cm2	140			140
Platen dimensions
Platen dimensions
Platen dimensions

TECHNICAL PARAMETERS

Project		Unit	YC-450			YC-550			YC-650
Injection Unit	Screw diameter	mm	Φ45	Φ50		Φ50	Φ55		Φ50	Φ55
	Shot volume	cm3	366	451		530	641		471	570
	Shot weight	gram	338	417		490	592		420	509
		ozs	11.9	14.7		17.3	20.9		14.8	17.9
	Injection pressure	kg/cm2	2676	2167		2309	1908		2764	2284
	Injection Speed	mm/s	88			82			82
	Injection rate	cm3/sec	140	172		162	196		160	194
	Screw Speed (max)	rpm	170			190
Clamping Unit	Clamping force	metric tons	450			550			650
	Clamping stroke	mm	600			620			650
	Mold thickness	mm	200-700			320-900			350-1000
	Rotary Table Diameter	mm	1250			1450			150
	Distance Between Barrel Centers	mm	550			650			37
	Distance between tie bar	mm	1100*600			1200*715			1260*780
	Ejector stroke	mm	140			140			140
Electrical Equipment	Pump Motor power	kw	21.2+21.2			30+30			30+30
	Temperature controller	(range)set	2-(0-400℃)*5			2-(0-400℃)*5			2-(0-400℃)*5
	Heater power	kw	26			26			32
Other	Machine dimensions	mm	7500*2000*2100			7850*2250*2200			8000*2250*2200
	Machine weight	metric tons	17.6			30			32
	System pressure	kg/cm2	140			140			140
Platen dimensions
Platen dimensions
Platen dimensions

TECHNICAL PARAMETERS

Project		Unit	YC-850			YC-1000			YC-1420
Injection Unit	Screw diameter	mm	Φ55	Φ70		Φ55	Φ70		Φ44	Φ70	Φ90
	Shot volume	cm3	665	1500		665	1500		665	1500	2893
	Shot weight	gram	614	1386		614	1386		614	1386	2673
		ozs	21.7	48.9		21.7	48.9		21.7	48.9	94.3
	Injection pressure	kg/cm2	2343	2210		2343	2271		2343	2210	1815
	Injection Speed	mm/s	105			105			105
	Injection rate	cm3/sec	249	403		249	403		249	403	667
	Screw Speed (max)	rpm	160			180			160
Clamping Unit	Clamping force	metric tons	850			1000			1420
	Clamping stroke	mm	1000			1100			1300
	Mold thickness	mm	400-1100			700-1300			700-1300
	Rotary Table Diameter	mm	1500			1600			1930
	Distance Between Barrel Centers	mm	700			710			710
	Distance between tie bar	mm	1060*1060			1130*1130			1330*1330
	Ejector stroke	mm	140			140			130
Electrical Equipment	Pump Motor power	kw	31.4+31.4			45+45			60+60
	Temperature controller	(range)set	2-(0-400℃)*5			2-(0-400℃)*5			2-(0-400℃)*5
	Heater power	kw	58			58.7			67.9
Other	Machine dimensions	mm	11100*2250*2300			11200*2300*2500			11500*3050*2750
	Machine weight	metric tons	50			56			70
	System pressure	kg/cm2	140			140			140
Platen dimensions
Platen dimensions
Platen dimensions

Note: The output of this product parameter is calculated according to the specific gravity of polystyrene of 1.05, assuming an efficiency of 0.88. As the product is continuously researched and improved, the design changes are subject to change without notice.